Degreaser for car services

The degreaser is used to clean concrete and asphalt surfaces covered in oils and grease, heavily contaminated with dirt and oils heavy good vehicles and machine details and parts.

Use: To clean oils on concrete and asphalt sites spray from the degreaser without dilution, rub 3-4 minutes with a hard brush and after that rinse with a jet steamer at a temperature of the water 50-60 °C. When you have fresh contaminations of the concrete and asphault sites the degreaser could be diluted 1:1 with water. To degrease and clean heavily contaminated and oiled heavy good vehicles should be used pressure pumps in which should be put 15% solution of the degreaser (7.5 litres from the concentrate is diluted in 42.5 l water).

The degreaser is applied on the contaminated surface by a pump and after 10 minutes it should be rinsed by a jet steamer with warm water. Degreasing and cleaning of machine details in bathtubs. Put 15% solution of the degreaser with water at a temperature 40 - 50 °C into the bathtub. Put the dirty details for 10-15 minutes, take them out and if there are any uncleaned surfaces wipe them with a brush or cloth, then rinse with a jet steamer and warm water.

The surfactants used in this cleaning product are readily biodegradable.